The most common question we get is "what will it cost?" The honest answer is that it depends on your surface, but most professional paver cleaning and sealing jobs in Tampa Bay fall around $1.75 to $3.00 or more per square foot. Here's what goes into that number, so you can compare quotes with confidence.
Every price on this page is an estimate, not a quote. Your actual cost depends on the condition of your paver system: the base and how level it is, the joints and sand, any old or failed sealer, stains, and the surface itself. We give you an exact written price only after we see and measure your project on site.
How Condition Changes Your Estimate
| Condition of the Paver System | What We Usually Find | Where the Estimate Usually Lands |
|---|---|---|
| Good | Level pavers, mostly full joints, sound or worn-thin sealer, light dirt | Toward the lower end of $1.75 to $3.00+ per sq ft |
| Fair | Mildew, rust or oil stains, partly empty joints, faded color | Middle of the range, plus stain treatment |
| Poor | Peeling, white, or cloudy sealer, heavy buildup, efflorescence | Stripping and full restoration, about $3.00 to $5.00 per sq ft |
| Needs repair | Sunken, shifted, or broken pavers | Repairs quoted separately before sealing |
Two driveways of the same size can have very different estimates. A well-kept system needs a clean, sand, and seal; a neglected one may need stain work, extra sand, or stripping first.
What's Included in a Professional Price
- Deep cleaning of the pavers and joints with commercial equipment
- Treatment of common stains before sealing
- ASTM C144 joint sand, washed deep into the joints
- A professional-grade Trident sealer, applied in the finish you choose
- Cleanup, including same-day pool cleaning on pool deck jobs
What Raises or Lowers the Price
| Factor | Why It Matters |
|---|---|
| Square footage | Larger areas usually cost less per square foot because setup is shared. |
| Old or failed sealer | Peeling, white, or cloudy sealer must be stripped first. |
| Stains | Heavy rust, oil, or efflorescence needs extra treatment. |
| Joint condition | Empty joints need more sand and labor. |
| Surface type | Travertine, marble, and natural stone need different cleaners and sealers. |
| Layout | Steps, tight walkways, and multiple levels take longer than open decks. |
| Add-ons | Slip resistance is available for an additional charge. |
What Stripping and Full Restoration Costs
Stripping failed sealer and fully restoring pavers, travertine, or stone is estimated at $3.00 to $5.00 per square foot, depending on how much sealer has built up and the condition of the pavers underneath. That covers removing the old coating, deep cleaning, fresh joint sand, and a new seal. It's more than a normal reseal because the old sealer has to come off first, and that's slow, careful work.
Avoid Paying Twice: The "$99 Guy"
Most of the stripping jobs we do started as a bargain: a flat "$99" or very low bid, a quick rinse, and a heavy coat of the wrong sealer. A few months later it's peeling, cloudy, or slippery, and the homeowner pays to have it removed and done again. That's why it pays to do your research and hire the most experienced company the first time. Ask how they prep, which sealer they use, how they install sand, and who does the work. See 8 questions to ask a paver sealing company.
Why Our Sealer Is the Better Value
Price per square foot is only half the picture; how long the seal lasts is the other half. We seal pavers with Trident Hurricane CAT 5, which has twice as much urethane as other brands. It provides commercial-grade protection, excellent color enhancement, and joint stability, and most of our customers report 3 to 4 years before they need a reseal.
A bargain job that has to be redone every year, or stripped after it fails, costs far more over time. Spread across 3 to 4 years, a CAT 5 seal is the best value in the business.
Comparing Quotes
A low quote often means less prep: a quick rinse, a dry sweep of sand, and a single heavy coat. That finish may look good for a few weeks, then fade, haze, or wash out. Ask every company:
- Will you measure on site and put the square footage in writing?
- Which sealer will you use, and is it right for my surface?
- How do you install joint sand?
- Who will actually do the work?
Read our tips on hiring a paver sealing company.
Customer Reviews: Paver Sealing Cost Guide
I highly recommend Sam and Steve for any paver cleaning and sealing work you may need. One thing I really appreciate is their explanation of all the work they will perform prior to giving an estimate. They have very fair pricing!! The work was phenomenal my travertine pool deck is 17 years old they cleaned and stripped off the old sealer and resealed and it looks like I have a brand NEW pool deck again!! Give them a call!!
I would highly recommend Paver Sealing Florida. Steve and Sam were very professional, polite, and knowledgeable. They worked at our house two days, cleaned and sealed our lanai and driveway. The transformation of our 4 year old pavers was amazing. They brought back colors in our pavers we forgot were there. We will definitely be calling them again. Top notch 5 out of 5 rating!
I highly recommend this company!!! Steve the owner and his brother do all the work themselves. I am highly impressed with the level of excellence when they sealed my natural stone pool deck and cleaned the screened in cage. They did a really nice job!!! I will never use anyone else again. It’s a level of quality I had not seen before with other companies.
More Reading on Paver Sealing Cost Guide
Paver Sealing Cost Guide FAQs
How much does it cost to seal pavers in Florida?
Professional cleaning, sanding, and sealing typically runs about $1.75 to $3.00 or more per square foot in Tampa Bay. Stripping old sealer, heavy rust, travertine, and add-ons like slip resistance can raise the price. These are estimates; your exact price depends on the condition of your paver system.
Is there a minimum charge?
Small jobs take nearly the same setup as large ones, so very small areas may have a minimum. We'll tell you up front in your written estimate.
Is it cheaper to seal pavers myself?
Materials alone can run $50 to $100 per gallon for professional-grade sealer, plus sand, cleaners, and equipment. The bigger risk is cost later: poor prep or heavy coats can leave a cloudy, peeling, or slippery finish that then has to be stripped.
Does stripping old sealer cost extra?
Yes. Removing failed sealer is extra labor and product. If your sealer is peeling, white, or blotchy, it needs to come off before resealing.
How do I get an exact price?
We measure on site and give you a free written estimate with the actual square footage. Call or text (813) 389-3683 or request an estimate online.
How much does it cost to strip paver sealer?
Stripping failed sealer and fully restoring pavers, travertine, or stone typically costs $3.00 to $5.00 per square foot in Tampa Bay, including cleaning, joint sand, and a new seal.
Why is a very cheap sealing quote risky?
Very low or flat-rate bids usually skip prep and use heavy coats of the wrong sealer. When it peels or clouds, stripping and redoing it typically costs $3.00 to $5.00 per square foot, often double the original job.
Why is your sealer a better value than cheaper options?
Hurricane CAT 5 has twice as much urethane as other brands, and most customers report 3 to 4 years before a reseal, so the cost per year is lower.