Paver Cleaning & Sealing in Lakeland Florida

brick-paver-sealing-tampa-brandon-riverview-floridaPaver Sealing Florida cleans and seals brick pavers driveways, pool areas ,walkways, and more throughout the Lakeland, Florida area for over 12 years. We offer fast, friendly service and get your paver sealing job done right the first time. We use the best brick paver and travertine cleaning and sealing products in the industry from Seal n Lock that are formulated to withstand Florida's tropical climate. 

 How We Clean Your Pavers

1. To clean the paver area, we begin using a commercial grade surface cleaner that has a rotating bar with 2 spray tips. This operates at 3500-4000 psi and will thoroughly scrub the pavers and paver joints without causing damage. We then "cross wash" the paver area again, so it gets "double scrubbed" to ensure they're clean, and to help remove algae buildup or dirty sand between the paver joints.

2. We then use a wand to pressure wash around all edges, corners, columns, etc. Pool areas also get detailed around the pool screen, pool coping, hot tubs, and other water features. The wand helps remove paint spots, mortar, grease, and more from the surface of your pavers.

Rinsing The Paver Area

3. After the washing process, we thouroughly rinse all dirt and debris from the paver area. Flusing the mold and algae from the paver joints is a key part of the rinsing process. Once the pavers are cleaned and rinsed thoroughly, we can then see the actual condition of the pavers, remove additional stains, etc.

Algaecide Deep Treatment

Some paver systems need our exclusive algaecide deep treatment where the paver joints are flooded with our algaecide/ sodium hypochlorite mixture and allowed to dwell, which will help kill additional mold and weeds between paver joints and under the paver system. This is particularly important step with older paver systems, and thin paver systems that are laid over concrete. After the appropriate dwell time, we then rinse all pavers again before beginning the resanding process.

Resanding The Paver Joints

4. Resanding the paver joints is a very important step in the restoration process, as the sand provides the stability of your entire paver system. We use a coarse-grained, washed silica sand and fill to within approximately 1/8" of the paver edge using the "wet sanding" method. Wet sanding is betther than sweeping because the wet sand settles to the lowest point and allows us to fill all paver joints properly and rinse away the excess.

5. Once the sanding of the paver joints is complete, we use a blower to blow any excess sand off the pavers before applying the sealer.

Applying The Sealer- Flood Coat

6. The first coat of sealer to be applied in our sealing process is called a "flood coat". The paver joints and surface of the pavers are actually flooded with sealer to ensure the sand absorbs the sealer, and that the paver itself gets soaked to create the barrier between your pavers and the elements. Getting the sealer deep into the paver helps bring out the true colors of your paver system, and keep them there. Flooding the paver joints locks in the sand, and will help prevent lots of problems with your paver system in the future.

Applying The 2nd Coat of Sealer

7. A second and third coat, or "top coats" of sealer is also applied to help form the protective barrier your pavers need, and to deliver more sealer to the paver joints. The 2nd coat adds another layer of protection helps give your paver system a hint of shine without becoming slippery or too shiny.
After the sealer fully cures, the sand will be fully locked into the paver joints, colors enhnaced, and long-lasting protection against the elements.

We offer additional coats of sealer as well.

Finishing The Job

After the sealer is applied, we use a backpack blower to help disperse excess sealer and to help recoat the paver surface. We make sure to wipe down pool cage, sliding doors, track drains, etc. For driveways, we make sure that all dirt and debris is rinsed from sidewalks and curb areas.

Seal 'n Lock recommends waiting 24 hours to return furniture to patios, and 48 hours before driving vehicles on driveways or paver roadways. Read more about Seal 'n Lock Paver Sealing Products Here

 Our sales team is available 7 days a week for an in-home consultation on your brick paver cleaning sealing and restoration project. A Paver Sealing Florida technician will be measuring the size of the job, and evaluating the overall condition of the pavers, drainage, problem areas, and making recommendations for necessary repairs. You will receive a written estimate with a detailed analysis of your project.

Lakeland's Premiere Brick Paver Sealing Company

Call Us At (813) 389-3683 For a Free Estimate Today!

Travertine Sealing Photo Gallery

  • Protects From Fading Let us help bring out the natural beauth of your travertine pool, patio, or driveway with Seal 'n Lock products. Seal 'n Lock contains UV additives to help protect from the harsh Florida sun.
  • Bring Out The Beauty Bring out the beauty of your travertine stone by first, properly cleaning, flushing the dirt and debris, resanding the joints (if necessary), and sealing the travertine with a suitable product, such as Seal 'n Lock.
  • Long Lasting Protection Seal 'n Lock products offer long lasting prtection from the elements with UV protection, algae and mold inhibitors, and high quality urethanes.
  • Should I Seal My Travertine? Absolutely! Travertine is a durable stone no doubt, but does need periodic preventative maintenance. Cleaning and sealing the travertine will bring out the natural colors and "lock it in" with a layer of sealer.
  • Builders & Contractors Paver Sealing Florida is the exclusive sealing contractor for many Tampa Bay area custom home builders, developers, and homeowners associations.
  • Non-Slip Coatings Available A slippery pool area is a potential safety hazard, so we offer a non-slip additive option in our pavers and travertine sealing service.
  • Step Into The Future Over the past 10 years, we have helped change the paver and travertine sealing industry. We have helped develop better cleaning & sealing techniques, and to field test many products the industry uses today.
  • Restoration Services We clean, seal, and restore Travertine pool decks, driveways, and patios. Call us today at (813) 389-3683 for a fast, free estimate on your travertine restoration project.
  • Travertine Sealing Experts Paver Sealing Florida is Tampa Bay's trusted leader in Travertine cleaning and sealing services. We offer both residential and commercial services in Hillsborough, Pinellas, Polk, and Pasco counties.